ARM: dts: aspeed: bletchley: Add INA230 sensor on each sled

Add INA230 node on each sled based on EVT HW.

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-9-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>

diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index c9c3ff39bee5b9b28c09c8e3def542aecdc599e4..3ab48420b712bb33fa392788872094867d661bf5 100644 (file)
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -248,7 +248,11 @@ flash@1 {
 
 &i2c0 {
        status = "okay";
-       /* TODO: Add ADC INA230 */
+       ina230@45 {
+               compatible = "ti,ina230";
+               reg = <0x45>;
+               shunt-resistor = <2000>;
+       };
 
        mp5023@40 {
                compatible = "mps,mp5023";
@@ -314,7 +318,11 @@ PDO_VAR(3000, 12000, 3000)
 
 &i2c1 {
        status = "okay";
-       /* TODO: Add ADC INA230 */
+       ina230@45 {
+               compatible = "ti,ina230";
+               reg = <0x45>;
+               shunt-resistor = <2000>;
+       };
 
        mp5023@40 {
                compatible = "mps,mp5023";
@@ -384,7 +392,11 @@ &i2c1 {
 
 &i2c2 {
        status = "okay";
-       /* TODO: Add ADC INA230 */
+       ina230@45 {
+               compatible = "ti,ina230";
+               reg = <0x45>;
+               shunt-resistor = <2000>;
+       };
 
        mp5023@40 {
                compatible = "mps,mp5023";
@@ -450,7 +462,11 @@ PDO_VAR(3000, 12000, 3000)
 
 &i2c3 {
        status = "okay";
-       /* TODO: Add ADC INA230 */
+       ina230@45 {
+               compatible = "ti,ina230";
+               reg = <0x45>;
+               shunt-resistor = <2000>;
+       };
 
        mp5023@40 {
                compatible = "mps,mp5023";
@@ -516,7 +532,11 @@ PDO_VAR(3000, 12000, 3000)
 
 &i2c4 {
        status = "okay";
-       /* TODO: Add ADC INA230 */
+       ina230@45 {
+               compatible = "ti,ina230";
+               reg = <0x45>;
+               shunt-resistor = <2000>;
+       };
 
        mp5023@40 {
                compatible = "mps,mp5023";
@@ -582,7 +602,11 @@ PDO_VAR(3000, 12000, 3000)
 
 &i2c5 {
        status = "okay";
-       /* TODO: Add ADC INA230 */
+       ina230@45 {
+               compatible = "ti,ina230";
+               reg = <0x45>;
+               shunt-resistor = <2000>;
+       };
 
        mp5023@40 {
                compatible = "mps,mp5023";