--- /dev/null
+
+y.service
+job
+activation-details-unit-type=path
+activation-details-unit-name
+activation-details-unit-name
\ No newline at end of file
+++ /dev/null
-
-y.service
-job
-activation-details-unit-type=path
-activation-details-unit-name
-activation-details-unit-name
\ No newline at end of file
+++ /dev/null
-
-d.socket
-job
-activation-details-unit-type=service
\ No newline at end of file
--- /dev/null
+
+d.socket
+job
+activation-details-unit-type=service
\ No newline at end of file
+++ /dev/null
-[NetDev]
-Name=test1
-Kind=dummy
+++ /dev/null
-[NetDev]
-Name=dummy98
-Kind=dummy
+++ /dev/null
-[NetDev]
-Name=macvlan99
-Kind=macvlan
+++ /dev/null
-[NetDev]
-Name=macvtap99
-Kind=macvtap
+++ /dev/null
-[NetDev]
-Name=vlan99
-Kind=vlan
-
-[VLAN]
-Id=99
-GVRP=true
-MVRP=true
-LooseBinding=true
-ReorderHeader=true
+++ /dev/null
-[NetDev]
-Name=6rdtun99
-Kind=sit
-
-[Tunnel]
-Local=10.65.223.238
-Remote=10.65.223.239
-IPv6RapidDeploymentPrefix=2602::/24
+++ /dev/null
-[NetDev]
-Name=bond199
-Kind=bond
-
-[Bond]
-Mode=active-backup
+++ /dev/null
-[NetDev]
-Name=bond99
-Kind=bond
-
-[Bond]
-Mode=802.3ad
-TransmitHashPolicy=layer3+4
-MIIMonitorSec=1s
-LACPTransmitRate=fast
-UpDelaySec=2s
-DownDelaySec=2s
-ResendIGMP=4
-MinLinks=1
-AdActorSystemPriority=1218
-AdUserPortKey=811
-AdActorSystem=00:11:22:33:44:55
-# feed the sanitizer
-AdActorSystem=00:11:22:33:44:55
+++ /dev/null
-[NetDev]
-Name=bridge99
-Kind=bridge
-
-[Bridge]
-HelloTimeSec=9
-MaxAgeSec=9
-ForwardDelaySec=9
-AgeingTimeSec=9
-Priority=9
-MulticastQuerier= true
-MulticastSnooping=true
-STP=true
+++ /dev/null
-[NetDev]
-Name=erspan-test
-Kind=erspan
-
-[Tunnel]
-Independent=true
-ERSPANIndex=123
-Local=172.16.1.200
-Remote=172.16.1.100
-Key=101
-SerializeTunneledPackets=true
+++ /dev/null
-[NetDev]
-Name=geneve99
-Kind=geneve
-
-[GENEVE]
-Id=99
-Remote=192.168.22.1
-TTL=1
-UDPChecksum=true
-UDP6ZeroChecksumTx=true
-UDP6ZeroChecksumRx=true
-DestinationPort=6082
+++ /dev/null
-[NetDev]
-Name=gretun99
-Kind=gre
-
-[Tunnel]
-Local=10.65.223.238
-Remote=10.65.223.239
+++ /dev/null
-[NetDev]
-Name=gretap99
-Kind=gretap
-
-[Tunnel]
-Local=10.65.223.238
-Remote=10.65.223.239
+++ /dev/null
-[NetDev]
-Name=ip6gretap99
-Kind=ip6gretap
-
-[Tunnel]
-Local=2a00:ffde:4567:edde::4987
-Remote=2001:473:fece:cafe::5179
+++ /dev/null
-[NetDev]
-Name=ip6tnl99
-Kind=ip6tnl
-
-[Tunnel]
-Mode=ip6ip6
-Local=2a00:ffde:4567:edde::4987
-Remote=2001:473:fece:cafe::5179
+++ /dev/null
-[NetDev]
-Name=ipiptun99
-Kind=ipip
-MTUBytes=1480
-
-[Tunnel]
-Local=192.168.223.238
-Remote=192.169.224.239
+++ /dev/null
-[NetDev]
-Name=ipiptun99
-Kind=ipip
-MTUBytes=1480
-
-[Tunnel]
-Local=192.168.223.238
-Remote=192.169.224.239
-Independent=true
+++ /dev/null
-[NetDev]
-Name=ipvlan99
-Kind=ipvlan
-
-[IPVLAN]
-Mode=L2
+++ /dev/null
-[NetDev]
-Name=sittun99
-Kind=sit
-
-[Tunnel]
-Local=10.65.223.238
-Remote=10.65.223.239
+++ /dev/null
-[NetDev]
-Name=tap99
-Kind=tap
-
-[Tap]
-MultiQueue=true
-PacketInfo=true
+++ /dev/null
-[NetDev]
-Name=tun99
-Kind=tun
-
-[Tun]
-MultiQueue=true
-PacketInfo=true
+++ /dev/null
-[NetDev]
-Name=vcan99
-Kind=vcan
+++ /dev/null
-[NetDev]
-Name=veth99
-Kind=veth
-MACAddress=12:34:56:78:9a:bc
-
-[Peer]
-Name=veth-peer
-MACAddress=12:34:56:78:9a:bd
+++ /dev/null
-[NetDev]
-Name=vrf99
-Kind=vrf
-
-[VRF]
-TableId=42
+++ /dev/null
-[NetDev]
-Name=vtitun99
-Kind=vti
-
-[Tunnel]
-Local=10.65.223.238
-Remote=10.65.223.239
+++ /dev/null
-[NetDev]
-Name=vti6tun99
-Kind=vti6
-
-[Tunnel]
-Local=2a00:ffde:4567:edde::4987
-Remote=2001:473:fece:cafe::5179
+++ /dev/null
-[NetDev]
-Name=vxlan99
-Kind=vxlan
-
-[VXLAN]
-Id=999
-L2MissNotification=true
-L3MissNotification=true
-RouteShortCircuit=true
-UDPChecksum=true
-UDP6ZeroChecksumTx=true
-UDP6ZeroChecksumRx=true
-RemoteChecksumTx=true
-RemoteChecksumRx=true
-GroupPolicyExtension=true
-DestinationPort=5555
+++ /dev/null
-[NetDev]
-Name=wg99
-Kind=wireguard
-
-[WireGuard]
-PrivateKey=EEGlnEPYJV//kbvvIqxKkQwOiS+UENyPncC4bF46ong=
-ListenPort=51820
-
-[WireGuardPeer]
-PublicKey=RDf+LSpeEre7YEIKaxg+wbpsNV7du+ktR99uBEtIiCA=
-AllowedIPs=fd31:bf08:57cb::/48,192.168.26.0/24
-Endpoint=wireguard.example.com:51820
+++ /dev/null
-[NetDev]
-Name=bridge99
-Kind=bridge
+++ /dev/null
-[NetDev]
-Name=xfrm99
-Kind=xfrm
-
-[Xfrm]
-InterfaceId=7
-Independent=false
+++ /dev/null
-[NetDev]
-Name=bat0
-Kind=batadv
-Description=Batman test
-
-[BatmanAdvanced]
-GatewayMode=server
-Aggregation=1
-BridgeLoopAvoidance=1
-DistributedArpTable=1
-Fragmentation=1
-HopPenalty=10
-OriginatorIntervalSec=1
-GatewayBandwidthDown=100K
-GatewayBandwidthUp=12K
-RoutingAlgorithm=batman-v
--- /dev/null
+[NetDev]
+Name=6rdtun99
+Kind=sit
+
+[Tunnel]
+Local=10.65.223.238
+Remote=10.65.223.239
+IPv6RapidDeploymentPrefix=2602::/24
--- /dev/null
+[NetDev]
+Name=bat0
+Kind=batadv
+Description=Batman test
+
+[BatmanAdvanced]
+GatewayMode=server
+Aggregation=1
+BridgeLoopAvoidance=1
+DistributedArpTable=1
+Fragmentation=1
+HopPenalty=10
+OriginatorIntervalSec=1
+GatewayBandwidthDown=100K
+GatewayBandwidthUp=12K
+RoutingAlgorithm=batman-v
--- /dev/null
+[NetDev]
+Name=bond199
+Kind=bond
+
+[Bond]
+Mode=active-backup
--- /dev/null
+[NetDev]
+Name=bond99
+Kind=bond
+
+[Bond]
+Mode=802.3ad
+TransmitHashPolicy=layer3+4
+MIIMonitorSec=1s
+LACPTransmitRate=fast
+UpDelaySec=2s
+DownDelaySec=2s
+ResendIGMP=4
+MinLinks=1
+AdActorSystemPriority=1218
+AdUserPortKey=811
+AdActorSystem=00:11:22:33:44:55
+# feed the sanitizer
+AdActorSystem=00:11:22:33:44:55
--- /dev/null
+[NetDev]
+Name=bridge99
+Kind=bridge
--- /dev/null
+[NetDev]
+Name=bridge99
+Kind=bridge
+
+[Bridge]
+HelloTimeSec=9
+MaxAgeSec=9
+ForwardDelaySec=9
+AgeingTimeSec=9
+Priority=9
+MulticastQuerier= true
+MulticastSnooping=true
+STP=true
--- /dev/null
+[NetDev]
+Name=dummy98
+Kind=dummy
--- /dev/null
+[NetDev]
+Name=test1
+Kind=dummy
--- /dev/null
+[NetDev]
+Name=erspan-test
+Kind=erspan
+
+[Tunnel]
+Independent=true
+ERSPANIndex=123
+Local=172.16.1.200
+Remote=172.16.1.100
+Key=101
+SerializeTunneledPackets=true
--- /dev/null
+[NetDev]
+Name=geneve99
+Kind=geneve
+
+[GENEVE]
+Id=99
+Remote=192.168.22.1
+TTL=1
+UDPChecksum=true
+UDP6ZeroChecksumTx=true
+UDP6ZeroChecksumRx=true
+DestinationPort=6082
--- /dev/null
+[NetDev]
+Name=gretun99
+Kind=gre
+
+[Tunnel]
+Local=10.65.223.238
+Remote=10.65.223.239
--- /dev/null
+[NetDev]
+Name=gretap99
+Kind=gretap
+
+[Tunnel]
+Local=10.65.223.238
+Remote=10.65.223.239
--- /dev/null
+[NetDev]
+Name=ip6gretap99
+Kind=ip6gretap
+
+[Tunnel]
+Local=2a00:ffde:4567:edde::4987
+Remote=2001:473:fece:cafe::5179
--- /dev/null
+[NetDev]
+Name=ip6tnl99
+Kind=ip6tnl
+
+[Tunnel]
+Mode=ip6ip6
+Local=2a00:ffde:4567:edde::4987
+Remote=2001:473:fece:cafe::5179
--- /dev/null
+[NetDev]
+Name=ipiptun99
+Kind=ipip
+MTUBytes=1480
+
+[Tunnel]
+Local=192.168.223.238
+Remote=192.169.224.239
--- /dev/null
+[NetDev]
+Name=ipiptun99
+Kind=ipip
+MTUBytes=1480
+
+[Tunnel]
+Local=192.168.223.238
+Remote=192.169.224.239
+Independent=true
--- /dev/null
+[NetDev]
+Name=ipvlan99
+Kind=ipvlan
+
+[IPVLAN]
+Mode=L2
--- /dev/null
+[NetDev]
+Name=macvlan99
+Kind=macvlan
--- /dev/null
+[NetDev]
+Name=macvtap99
+Kind=macvtap
--- /dev/null
+[NetDev]
+Name=sittun99
+Kind=sit
+
+[Tunnel]
+Local=10.65.223.238
+Remote=10.65.223.239
--- /dev/null
+[NetDev]
+Name=tap99
+Kind=tap
+
+[Tap]
+MultiQueue=true
+PacketInfo=true
--- /dev/null
+[NetDev]
+Name=tun99
+Kind=tun
+
+[Tun]
+MultiQueue=true
+PacketInfo=true
--- /dev/null
+[NetDev]
+Name=vcan99
+Kind=vcan
--- /dev/null
+[NetDev]
+Name=veth99
+Kind=veth
+MACAddress=12:34:56:78:9a:bc
+
+[Peer]
+Name=veth-peer
+MACAddress=12:34:56:78:9a:bd
--- /dev/null
+[NetDev]
+Name=vlan99
+Kind=vlan
+
+[VLAN]
+Id=99
+GVRP=true
+MVRP=true
+LooseBinding=true
+ReorderHeader=true
--- /dev/null
+[NetDev]
+Name=vrf99
+Kind=vrf
+
+[VRF]
+TableId=42
--- /dev/null
+[NetDev]
+Name=vtitun99
+Kind=vti
+
+[Tunnel]
+Local=10.65.223.238
+Remote=10.65.223.239
--- /dev/null
+[NetDev]
+Name=vti6tun99
+Kind=vti6
+
+[Tunnel]
+Local=2a00:ffde:4567:edde::4987
+Remote=2001:473:fece:cafe::5179
--- /dev/null
+[NetDev]
+Name=vxlan99
+Kind=vxlan
+
+[VXLAN]
+Id=999
+L2MissNotification=true
+L3MissNotification=true
+RouteShortCircuit=true
+UDPChecksum=true
+UDP6ZeroChecksumTx=true
+UDP6ZeroChecksumRx=true
+RemoteChecksumTx=true
+RemoteChecksumRx=true
+GroupPolicyExtension=true
+DestinationPort=5555
--- /dev/null
+[NetDev]
+Name=w
+Kind=wireguard
+[WireGuardPeer]
+Endpoint=:0
+Endpoint=:8
\ No newline at end of file
+++ /dev/null
-[NetDev]
-Name=w
-Kind=wireguard
-[WireGuardPeer]
-Endpoint=:0
-Endpoint=:8
\ No newline at end of file
--- /dev/null
+[NetDev]
+Name=wg99
+Kind=wireguard
+
+[WireGuard]
+PrivateKey=EEGlnEPYJV//kbvvIqxKkQwOiS+UENyPncC4bF46ong=
+ListenPort=51820
+
+[WireGuardPeer]
+PublicKey=RDf+LSpeEre7YEIKaxg+wbpsNV7du+ktR99uBEtIiCA=
+AllowedIPs=fd31:bf08:57cb::/48,192.168.26.0/24
+Endpoint=wireguard.example.com:51820
--- /dev/null
+[NetDev]
+Name=xfrm99
+Kind=xfrm
+
+[Xfrm]
+InterfaceId=7
+Independent=false
+++ /dev/null
-[Match]
-Name=test1
-
-[Network]
-VLAN=vlan99
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Network]
-Bond=bond199
-ActiveSlave=true
+++ /dev/null
-[Match]
-Name=bond199
+++ /dev/null
-[Match]
-Name=veth-peer
-
-[Network]
-EmitLLDP=yes
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Network]
-Bond=bond199
-PrimarySlave=true
+++ /dev/null
-[Match]
-Name=test1
-
-[Network]
-Bond=bond199
-PrimarySlave=true
+++ /dev/null
-[Match]
-Name=veth99
-
-[Network]
-LLDP=yes
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Network]
-Address=192.168.42.100
-DNS=192.168.42.1
-Domains= one two three four five six seven eight nine ten
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Link]
-MACAddress=00:01:02:aa:bb:cc
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Address]
-Address=10.2.3.4/16
-Peer=10.2.3.5/16
-Label=32
-
-[Address]
-Address=10.6.7.8/16
-Label=33
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Address]
-Address=10.2.3.4/16
-PreferredLifetime=0
-Scope=link
-
-[Address]
-Address=2001:0db8:0:f101::1/64
+++ /dev/null
-[Match]
-Name=test1
-
-[RoutingPolicyRule]
-TypeOfService=0x08
-Table=7
-From= 192.168.100.18
-Priority=111
-SourcePort = 1123-1150
-DestinationPort = 3224-3290
-IPProtocol = tcp
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Link]
-MACAddress=00:01:02:aa:bb:cc
-Unmanaged=true
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Neighbor]
-Address=2004:da8:1:0::
-MACAddress=00:00:5e:00:02:00
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Network]
-Address=192.168.0.15/24
-
-[Route]
-Gateway=192.168.0.1
+++ /dev/null
-[Match]
-Name=test1
-
-[Route]
-Destination=192.168.1.1
-InitialCongestionWindow=20
-
-[Route]
-Destination=192.168.1.2
-InitialAdvertisedReceiveWindow=30
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Route]
-Type=blackhole
-Destination=202.54.1.2
-
-[Route]
-Type=unreachable
-Destination=202.54.1.3
-
-[Route]
-Type=prohibit
-Destination=202.54.1.4
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Network]
-IPForward=true
-IPv6PrivacyExtensions=true
-IPv6DuplicateAddressDetection=3
-IPv6HopLimit=5
-IPv4ProxyARP=true
-IPv6ProxyNDP=true
+++ /dev/null
-[Match]
-Name=dummy98
-
-[Network]
-Bridge=bridge99
-
-[Bridge]
-Cost=400
-HairPin = true
-Isolated = true
-FastLeave = true
-UnicastFlood = true
-MulticastToUnicast = true
+++ /dev/null
-[Match]
-Name=test1
-
-[Network]
-Bridge=bridge99
+++ /dev/null
-[Match]
-Name=eth0
-
-[Network]
-Xfrm=xfrm99
--- /dev/null
+[Match]
+Name=dummy98
+
+[Network]
+Bond=bond199
+ActiveSlave=true
--- /dev/null
+[Match]
+Name=dummy98
+
+[Link]
+MACAddress=00:01:02:aa:bb:cc
--- /dev/null
+[Match]
+Name=dummy98
+
+[Address]
+Address=10.2.3.4/16
+Peer=10.2.3.5/16
+Label=32
+
+[Address]
+Address=10.6.7.8/16
+Label=33
--- /dev/null
+[Match]
+Name=dummy98
+
+[Address]
+Address=10.2.3.4/16
+PreferredLifetime=0
+Scope=link
+
+[Address]
+Address=2001:0db8:0:f101::1/64
--- /dev/null
+[Match]
+Name=bond199
--- /dev/null
+[Match]
+Name=dummy98
+
+[Network]
+Bridge=bridge99
+
+[Bridge]
+Cost=400
+HairPin = true
+Isolated = true
+FastLeave = true
+UnicastFlood = true
+MulticastToUnicast = true
--- /dev/null
+[Match]
+Name=test1
+
+[Network]
+Bridge=bridge99
--- /dev/null
+[Match]
+Name=test1
+
+[Network]
+Address=192.168.0.15/24
+Gateway=192.168.0.1
+ConfigureWithoutCarrier=true
+++ /dev/null
-[Match]
-Name=test1
-
-[Network]
-Address=192.168.0.15/24
-Gateway=192.168.0.1
-ConfigureWithoutCarrier=true
+++ /dev/null
-[Match]
-Name=veth99
-
-[Network]
-IPv6AcceptRA=false
-DHCP=ipv4
-UseRoutes=true
-UseTimezone=true
--- /dev/null
+[Match]
+Name=veth99
+
+[Network]
+IPv6AcceptRA=false
+DHCP=ipv4
+UseRoutes=true
+UseTimezone=true
+++ /dev/null
-[Match]
-Name=veth-peer
-
-[Network]
-IPv6AcceptRA=false
-Address=192.168.5.1/24
-DHCPServer=yes
-
-[DHCPServer]
-PoolOffset=10
-PoolSize=50
-EmitRouter=yes
-Timezone=Europe/Berlin
--- /dev/null
+[Match]
+Name=veth-peer
+
+[Network]
+IPv6AcceptRA=false
+Address=192.168.5.1/24
+DHCPServer=yes
+
+[DHCPServer]
+PoolOffset=10
+PoolSize=50
+EmitRouter=yes
+Timezone=Europe/Berlin
+++ /dev/null
-[Match]
-Name=veth99
-
-[Network]
-DHCP=ipv6
-
-[DHCP]
-RapidCommit=false
--- /dev/null
+[Match]
+Name=veth99
+
+[Network]
+DHCP=ipv6
+
+[DHCP]
+RapidCommit=false
+++ /dev/null
-[Network]
-DNSSECNegativeTrustAnchors=i i
\ No newline at end of file
--- /dev/null
+[Network]
+DNSSECNegativeTrustAnchors=i i
\ No newline at end of file
--- /dev/null
+[Match]
+Name=veth-peer
+
+[Network]
+EmitLLDP=yes
--- /dev/null
+[Match]
+Name=test1
+
+[RoutingPolicyRule]
+TypeOfService=0x08
+Table=7
+From= 192.168.100.18
+Priority=111
+SourcePort = 1123-1150
+DestinationPort = 3224-3290
+IPProtocol = tcp
--- /dev/null
+[Match]
+Name=dummy98
+
+[IPv6AddressLabel]
+Label=4444
+Prefix=2004:da8:1:0::/64
+++ /dev/null
-[Match]
-Name=dummy98
-
-[IPv6AddressLabel]
-Label=4444
-Prefix=2004:da8:1:0::/64
--- /dev/null
+[Match]
+Name=dummy98
+
+[Link]
+MACAddress=00:01:02:aa:bb:cc
+Unmanaged=true
--- /dev/null
+[Match]
+Name=veth99
+
+[Network]
+LLDP=yes
--- /dev/null
+[Match]
+Name=dummy98
+
+[Neighbor]
+Address=2004:da8:1:0::
+MACAddress=00:00:5e:00:02:00
--- /dev/null
+[Match]
+Name=dummy98
+
+[Network]
+Bond=bond199
+PrimarySlave=true
--- /dev/null
+[Match]
+Name=dummy98
+
+[Network]
+Address=192.168.0.15/24
+
+[Route]
+Gateway=192.168.0.1
--- /dev/null
+[Match]
+Name=dummy98
+
+[Route]
+Type=blackhole
+Destination=202.54.1.2
+
+[Route]
+Type=unreachable
+Destination=202.54.1.3
+
+[Route]
+Type=prohibit
+Destination=202.54.1.4
--- /dev/null
+[Match]
+Name=dummy98
+
+[Network]
+Address=192.168.42.100
+DNS=192.168.42.1
+Domains= one two three four five six seven eight nine ten
--- /dev/null
+[Match]
+Name=dummy98
+
+[Network]
+IPForward=true
+IPv6PrivacyExtensions=true
+IPv6DuplicateAddressDetection=3
+IPv6HopLimit=5
+IPv4ProxyARP=true
+IPv6ProxyNDP=true
--- /dev/null
+[Match]
+Name=test1
+
+[Route]
+Destination=192.168.1.1
+InitialCongestionWindow=20
+
+[Route]
+Destination=192.168.1.2
+InitialAdvertisedReceiveWindow=30
--- /dev/null
+[Match]
+Name=test1
+
+[Network]
+Bond=bond199
+PrimarySlave=true
--- /dev/null
+[Match]
+Name=test1
+
+[Network]
+VLAN=vlan99
--- /dev/null
+[Match]
+Name=eth0
+
+[Network]
+Xfrm=xfrm99
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-# run a command on remove events
-ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
-ACTION=="remove", GOTO="default_end"
-
-SUBSYSTEM=="virtio-ports", KERNEL=="vport*", ATTR{name}=="?*", SYMLINK+="virtio-ports/$attr{name}"
-
-# select "system RTC" or just use the first one
-SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc"
-SUBSYSTEM=="rtc", KERNEL=="rtc0", SYMLINK+="rtc", OPTIONS+="link_priority=-100"
-
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
-ENV{MODALIAS}!="", IMPORT{builtin}="hwdb --subsystem=$env{SUBSYSTEM}"
-
-ACTION!="add", GOTO="default_end"
-
-SUBSYSTEM=="tty", KERNEL=="ptmx", GROUP="tty", MODE="0666"
-SUBSYSTEM=="tty", KERNEL=="tty", GROUP="tty", MODE="0666"
-SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620"
-SUBSYSTEM=="tty", KERNEL=="sclp_line[0-9]*", GROUP="tty", MODE="0620"
-SUBSYSTEM=="tty", KERNEL=="ttysclp[0-9]*", GROUP="tty", MODE="0620"
-SUBSYSTEM=="tty", KERNEL=="3270/tty[0-9]*", GROUP="tty", MODE="0620"
-SUBSYSTEM=="vc", KERNEL=="vcs*|vcsa*", GROUP="tty"
-KERNEL=="tty[A-Z]*[0-9]|ttymxc[0-9]*|pppox[0-9]*|ircomm[0-9]*|noz[0-9]*|rfcomm[0-9]*", GROUP="dialout"
-
-SUBSYSTEM=="mem", KERNEL=="mem|kmem|port", GROUP="kmem", MODE="0640"
-
-SUBSYSTEM=="input", GROUP="input"
-SUBSYSTEM=="input", KERNEL=="js[0-9]*", MODE="0664"
-
-SUBSYSTEM=="video4linux", GROUP="video"
-SUBSYSTEM=="graphics", GROUP="video"
-SUBSYSTEM=="drm", KERNEL!="renderD*", GROUP="video"
-SUBSYSTEM=="dvb", GROUP="video"
-SUBSYSTEM=="media", GROUP="video"
-SUBSYSTEM=="cec", GROUP="video"
-
-SUBSYSTEM=="drm", KERNEL=="renderD*", GROUP="render", MODE="0666"
-SUBSYSTEM=="kfd", GROUP="render", MODE="0666"
-
-SUBSYSTEM=="sound", GROUP="audio", \
- OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer"
-
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
-
-SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", GROUP="video"
-SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", GROUP="video"
-SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video"
-SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", GROUP="video"
-
-KERNEL=="parport[0-9]*", GROUP="lp"
-SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp"
-SUBSYSTEM=="ppdev", GROUP="lp"
-KERNEL=="lp[0-9]*", GROUP="lp"
-KERNEL=="irlpt[0-9]*", GROUP="lp"
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
-
-SUBSYSTEM=="block", GROUP="disk"
-SUBSYSTEM=="block", KERNEL=="sr[0-9]*", GROUP="cdrom"
-SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom"
-KERNEL=="sch[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd", GROUP="cdrom"
-
-SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape"
-SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk"
-KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk"
-KERNEL=="loop-control", GROUP="disk", OPTIONS+="static_node=loop-control"
-KERNEL=="btrfs-control", GROUP="disk"
-KERNEL=="rawctl", GROUP="disk"
-SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", GROUP="disk"
-SUBSYSTEM=="aoe", GROUP="disk", MODE="0220"
-SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"
-
-KERNEL=="rfkill", MODE="0664"
-KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun"
-
-KERNEL=="fuse", MODE="0666", OPTIONS+="static_node=fuse"
-
-# The static_node is required on s390x and ppc (they are using MODULE_ALIAS)
-KERNEL=="kvm", GROUP="kvm", MODE="0666", OPTIONS+="static_node=kvm"
-
-SUBSYSTEM=="ptp", ATTR{clock_name}=="KVM virtual PTP", SYMLINK += "ptp_kvm"
-
-LABEL="default_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-# enable in-kernel media-presence polling
-ACTION=="add", SUBSYSTEM=="module", KERNEL=="block", ATTR{parameters/events_dfl_poll_msecs}=="0", \
- ATTR{parameters/events_dfl_poll_msecs}="2000"
-
-# forward scsi device event to corresponding block device
-ACTION=="change", SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST=="block", ATTR{block/*/uevent}="change"
-
-# watch metadata changes, caused by tools closing the device node which was opened for writing
-ACTION!="remove", SUBSYSTEM=="block", KERNEL=="loop*|nvme*|sd*|vd*|xvd*|pmem*|mmcblk*", OPTIONS+="watch"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="cdrom_end"
-SUBSYSTEM!="block", GOTO="cdrom_end"
-KERNEL!="sr[0-9]*|vdisk*|xvd*", GOTO="cdrom_end"
-ENV{DEVTYPE}!="disk", GOTO="cdrom_end"
-
-# unconditionally tag device as CDROM
-KERNEL=="sr[0-9]*", ENV{ID_CDROM}="1"
-
-# stop automatically any mount units bound to the device if the media eject
-# button is pressed.
-ENV{ID_CDROM}=="1", ENV{SYSTEMD_MOUNT_DEVICE_BOUND}="1"
-
-# media eject button pressed
-ENV{DISK_EJECT_REQUEST}=="?*", RUN+="cdrom_id --eject-media $devnode", GOTO="cdrom_end"
-
-# import device and media properties and lock tray to
-# enable the receiving of media eject button events
-IMPORT{program}="cdrom_id --lock-media $devnode"
-
-# ejecting a CD does not remove the device node, so mark the systemd device
-# unit as inactive while there is no medium; this automatically cleans up of
-# stale mounts after ejecting
-ENV{DISK_MEDIA_CHANGE}=="?*", ENV{ID_CDROM_MEDIA}!="?*", ENV{SYSTEMD_READY}="0"
-
-KERNEL=="sr0", SYMLINK+="cdrom", OPTIONS+="link_priority=-100"
-
-LABEL="cdrom_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION!="remove", SUBSYSTEM=="drm", SUBSYSTEMS=="pci|usb|platform", IMPORT{builtin}="path_id"
-
-# by-path
-ENV{ID_PATH}=="?*", KERNEL=="card*", SYMLINK+="dri/by-path/$env{ID_PATH}-card"
-ENV{ID_PATH}=="?*", KERNEL=="controlD*", SYMLINK+="dri/by-path/$env{ID_PATH}-control"
-ENV{ID_PATH}=="?*", KERNEL=="renderD*", SYMLINK+="dri/by-path/$env{ID_PATH}-render"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="evdev_end"
-KERNEL!="event*", GOTO="evdev_end"
-
-# skip later rules when we find something for this input device
-IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=evdev:", \
- RUN{builtin}+="keyboard", GOTO="evdev_end"
-
-# AT keyboard matching by the machine's DMI data
-DRIVERS=="atkbd", \
- IMPORT{builtin}="hwdb 'evdev:atkbd:$attr{[dmi/id]modalias}'", \
- RUN{builtin}+="keyboard", GOTO="evdev_end"
-
-# device matching the input device name + properties + the machine's DMI data
-KERNELS=="input*", IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:phys:$attr{phys}:ev:$attr{capabilities/ev}:$attr{[dmi/id]modalias}'", \
- RUN{builtin}+="keyboard", GOTO="evdev_end"
-
-# device matching the input device name and the machine's DMI data
-KERNELS=="input*", IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:$attr{[dmi/id]modalias}'", \
- RUN{builtin}+="keyboard", GOTO="evdev_end"
-
-LABEL="evdev_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="id_input_end"
-
-SUBSYSTEM=="input", ENV{ID_INPUT}=="", IMPORT{builtin}="input_id"
-SUBSYSTEM=="input", IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=id-input:modalias:"
-
-LABEL="id_input_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="persistent_alsa_end"
-SUBSYSTEM!="sound", GOTO="persistent_alsa_end"
-KERNEL!="controlC[0-9]*", GOTO="persistent_alsa_end"
-
-SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id"
-ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}"
-ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-
-IMPORT{builtin}="path_id"
-ENV{ID_PATH}=="?*", SYMLINK+="snd/by-path/$env{ID_PATH}"
-
-LABEL="persistent_alsa_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="persistent_input_end"
-SUBSYSTEM!="input", GOTO="persistent_input_end"
-SUBSYSTEMS=="bluetooth", ENV{ID_BUS}="bluetooth", GOTO="persistent_input_end"
-# Bluetooth devices don't always have the bluetooth subsystem
-ATTRS{id/bustype}=="0005", ENV{ID_BUS}="bluetooth", GOTO="persistent_input_end"
-SUBSYSTEMS=="rmi4", ENV{ID_BUS}="rmi"
-SUBSYSTEMS=="serio", ENV{ID_BUS}="i8042"
-
-SUBSYSTEMS=="usb", ENV{ID_BUS}=="", IMPORT{builtin}="usb_id"
-
-# determine class name for persistent symlinks
-ENV{ID_INPUT_KEYBOARD}=="?*", ENV{.INPUT_CLASS}="kbd"
-ENV{ID_INPUT_MOUSE}=="?*", ENV{.INPUT_CLASS}="mouse"
-ENV{ID_INPUT_TOUCHPAD}=="?*", ENV{.INPUT_CLASS}="mouse"
-ENV{ID_INPUT_TABLET}=="?*", ENV{.INPUT_CLASS}="mouse"
-ENV{ID_INPUT_JOYSTICK}=="?*", ENV{.INPUT_CLASS}="joystick"
-DRIVERS=="pcspkr", ENV{.INPUT_CLASS}="spkr"
-ATTRS{name}=="*dvb*|*DVB*|* IR *", ENV{.INPUT_CLASS}="ir"
-
-# fill empty serial number
-ENV{.INPUT_CLASS}=="?*", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial"
-
-# by-id links
-KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{.INPUT_CLASS}"
-KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-$env{.INPUT_CLASS}"
-KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{.INPUT_CLASS}"
-KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-event-$env{.INPUT_CLASS}"
-# allow empty class for USB devices, by appending the interface number
-SUBSYSTEMS=="usb", ENV{ID_BUS}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", ATTRS{bInterfaceNumber}=="?*", \
- SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-if$attr{bInterfaceNumber}"
-
-# by-path
-SUBSYSTEMS=="pci|usb|platform|acpi", IMPORT{builtin}="path_id"
-ENV{ID_PATH}=="?*", KERNEL=="mouse*|js*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-$env{.INPUT_CLASS}"
-ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{.INPUT_CLASS}"
-# allow empty class for platform and usb devices; platform supports only a single interface that way
-SUBSYSTEMS=="usb|platform", ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", \
- SYMLINK+="input/by-path/$env{ID_PATH}-event"
-
-LABEL="persistent_input_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-# persistent storage links: /dev/tape/{by-id,by-path}
-
-ACTION=="remove", GOTO="persistent_storage_tape_end"
-ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_tape_end"
-
-# type 8 devices are "Medium Changers"
-SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="scsi_id --sg-version=3 --export --allowlisted -d $devnode", \
- SYMLINK+="tape/by-id/scsi-$env{ID_SERIAL}"
-
-# iSCSI devices from the same host have all the same ID_SERIAL,
-# but additionally a property named ID_SCSI_SERIAL.
-SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", ENV{ID_SCSI_SERIAL}=="?*", \
- SYMLINK+="tape/by-id/scsi-$env{ID_SCSI_SERIAL}"
-
-SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{builtin}="path_id", \
- SYMLINK+="tape/by-path/$env{ID_PATH}-changer"
-
-SUBSYSTEM!="scsi_tape", GOTO="persistent_storage_tape_end"
-
-KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394"
-KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
-KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", KERNELS=="[0-9]*:*[0-9]", ENV{.BSG_DEV}="$root/bsg/$id"
-KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --allowlisted --export --device=$env{.BSG_DEV}", ENV{ID_BUS}="scsi"
-KERNEL=="st*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-KERNEL=="st*[0-9]", ENV{ID_SCSI_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SCSI_SERIAL}"
-KERNEL=="nst*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst"
-KERNEL=="nst*[0-9]", ENV{ID_SCSI_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SCSI_SERIAL}-nst"
-
-# by-path (parent device path)
-KERNEL=="st*[0-9]|nst*[0-9]", IMPORT{builtin}="path_id"
-KERNEL=="st*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}"
-KERNEL=="nst*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}-nst"
-
-LABEL="persistent_storage_tape_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-# persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path}
-# scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de>
-
-ACTION=="remove", GOTO="persistent_storage_end"
-ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_end"
-
-SUBSYSTEM!="block", GOTO="persistent_storage_end"
-KERNEL!="loop*|mmcblk*[0-9]|msblk*[0-9]|mspblk*[0-9]|nvme*|sd*|sr*|vd*|xvd*|bcache*|cciss*|dasd*|ubd*|scm*|pmem*|nbd*|zd*", GOTO="persistent_storage_end"
-
-# ignore partitions that span the entire disk
-TEST=="whole_disk", GOTO="persistent_storage_end"
-
-# for partitions import parent information
-ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*"
-
-# NVMe
-KERNEL=="nvme*[0-9]n*[0-9]", ATTR{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}"
-KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}-part%n"
-
-KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}"
-KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{wwid}=="?*", ENV{ID_WWN}="$attr{wwid}"
-KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}"
-KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{firmware_rev}=="?*", ENV{ID_REVISION}="$attr{firmware_rev}"
-KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \
- ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}"
-
-KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}"
-KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}"
-KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{firmware_rev}=="?*", ENV{ID_REVISION}="$attr{firmware_rev}"
-KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \
- ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}-part%n"
-
-# virtio-blk
-KERNEL=="vd*[!0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}"
-KERNEL=="vd*[0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}-part%n"
-
-# ATA
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $devnode"
-
-# ATAPI devices (SPC-3 or later)
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $devnode"
-
-# Run ata_id on non-removable USB Mass Storage (SATA/PATA disks in enclosures)
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", ATTR{removable}=="0", SUBSYSTEMS=="usb", IMPORT{program}="ata_id --export $devnode"
-
-# Fall back usb_id for USB devices
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
-
-# SCSI devices
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --allowlisted -d $devnode", ENV{ID_BUS}="scsi"
-KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --allowlisted -d $devnode", ENV{ID_BUS}="cciss"
-KERNEL=="sd*|sr*|cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-KERNEL=="sd*|cciss*", ENV{DEVTYPE}=="partition", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
-
-# PMEM devices
-KERNEL=="pmem*", ENV{DEVTYPE}=="disk", ATTRS{uuid}=="?*", SYMLINK+="disk/by-id/pmem-$attr{uuid}"
-
-# FireWire
-KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}"
-KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n"
-
-# MMC
-KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ATTRS{serial}=="?*", \
- ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}"
-KERNEL=="mmcblk[0-9]p[0-9]*", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
-
-# Memstick
-KERNEL=="msblk[0-9]|mspblk[0-9]", SUBSYSTEMS=="memstick", ATTRS{name}=="?*", ATTRS{serial}=="?*", \
- ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}"
-KERNEL=="msblk[0-9]p[0-9]|mspblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
-
-# by-path
-ENV{DEVTYPE}=="disk", DEVPATH!="*/virtual/*", IMPORT{builtin}="path_id"
-KERNEL=="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-boot%n"
-KERNEL!="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
-ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
-
-# legacy virtio-pci by-path links (deprecated)
-KERNEL=="vd*[!0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}"
-KERNEL=="vd*[0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}-part%n"
-
-# probe filesystem metadata of optical drives which have a media inserted
-KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?*", \
- IMPORT{builtin}="blkid --hint=session_offset=$env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}"
-# single-session CDs do not have ID_CDROM_MEDIA_SESSION_LAST_OFFSET
-KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", \
- IMPORT{builtin}="blkid --noraid"
-
-# probe filesystem metadata of disks
-KERNEL!="sr*", IMPORT{builtin}="blkid"
-
-# by-label/by-uuid links (filesystem metadata)
-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
-
-# by-id (World Wide Name)
-ENV{DEVTYPE}=="disk", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}"
-ENV{DEVTYPE}=="partition", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}-part%n"
-
-# by-partlabel/by-partuuid links (partition metadata)
-ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}"
-ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}"
-
-LABEL="persistent_storage_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="persistent_v4l_end"
-SUBSYSTEM!="video4linux", GOTO="persistent_v4l_end"
-ENV{MAJOR}=="", GOTO="persistent_v4l_end"
-
-IMPORT{program}="v4l_id $devnode"
-
-SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
-KERNEL=="video*", ENV{ID_SERIAL}=="?*", SYMLINK+="v4l/by-id/$env{ID_BUS}-$env{ID_SERIAL}-video-index$attr{index}"
-
-# check for valid "index" number
-TEST!="index", GOTO="persistent_v4l_end"
-ATTR{index}!="?*", GOTO="persistent_v4l_end"
-
-IMPORT{builtin}="path_id"
-ENV{ID_PATH}=="?*", KERNEL=="video*|vbi*", SYMLINK+="v4l/by-path/$env{ID_PATH}-video-index$attr{index}"
-ENV{ID_PATH}=="?*", KERNEL=="audio*", SYMLINK+="v4l/by-path/$env{ID_PATH}-audio-index$attr{index}"
-
-LABEL="persistent_v4l_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="sensor_end"
-
-# device matching the sensor's name and the machine's DMI data for IIO devices
-SUBSYSTEM=="iio", KERNEL=="iio*", SUBSYSTEMS=="usb|i2c", \
- IMPORT{builtin}="hwdb 'sensor:modalias:$attr{modalias}:$attr{[dmi/id]modalias}'", \
- GOTO="sensor_end"
-
-SUBSYSTEM=="input", ENV{ID_INPUT_ACCELEROMETER}=="1", SUBSYSTEMS=="acpi", \
- IMPORT{builtin}="hwdb 'sensor:modalias:acpi:$attr{hid}:$attr{[dmi/id]modalias}'", \
- GOTO="sensor_end"
-
-SUBSYSTEM=="input", ENV{ID_INPUT_ACCELEROMETER}=="1", SUBSYSTEMS=="platform", \
- IMPORT{builtin}="hwdb 'sensor:modalias:platform:$id:$attr{[dmi/id]modalias}'", \
- GOTO="sensor_end"
-
-LABEL="sensor_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="serial_end"
-SUBSYSTEM!="tty", GOTO="serial_end"
-
-SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
-SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci"
-SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
-
-# /dev/serial/by-path/, /dev/serial/by-id/ for USB devices
-KERNEL!="ttyUSB[0-9]*|ttyACM[0-9]*", GOTO="serial_end"
-
-SUBSYSTEMS=="usb-serial", ENV{.ID_PORT}="$attr{port_number}"
-
-IMPORT{builtin}="path_id"
-ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="", SYMLINK+="serial/by-path/$env{ID_PATH}"
-ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-path/$env{ID_PATH}-port$env{.ID_PORT}"
-
-IMPORT{builtin}="usb_id"
-ENV{ID_SERIAL}=="", GOTO="serial_end"
-SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACE_NUM}="$attr{bInterfaceNumber}"
-ENV{ID_USB_INTERFACE_NUM}=="", GOTO="serial_end"
-ENV{.ID_PORT}=="", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}"
-ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}-port$env{.ID_PORT}"
-
-LABEL="serial_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-SUBSYSTEM!="block", GOTO="btrfs_end"
-ACTION=="remove", GOTO="btrfs_end"
-ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end"
-ENV{SYSTEMD_READY}=="0", GOTO="btrfs_end"
-
-# let the kernel know about this btrfs filesystem, and check if it is complete
-IMPORT{builtin}="btrfs ready $devnode"
-
-# mark the device as not ready to be used by the system
-ENV{ID_BTRFS_READY}=="0", ENV{SYSTEMD_READY}="0"
-
-# reconsider pending devices in case when multidevice volume awaits
-ENV{ID_BTRFS_READY}=="1", RUN+="/usr/bin/udevadm trigger -s block -p ID_BTRFS_READY=0"
-
-LABEL="btrfs_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="joystick_end"
-ENV{ID_INPUT_JOYSTICK}=="", GOTO="joystick_end"
-KERNEL!="event*", GOTO="joystick_end"
-
-# joystick:<bustype>:v<vid>p<pid>:name:<name>:*
-KERNELS=="input*", ENV{ID_BUS}!="", \
- IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
- GOTO="joystick_end"
-
-LABEL="joystick_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="mouse_end"
-KERNEL!="event*", GOTO="mouse_end"
-ENV{ID_INPUT_MOUSE}=="", GOTO="mouse_end"
-
-# mouse:<subsystem>:v<vid>p<pid>:name:<name>:*
-KERNELS=="input*", ENV{ID_BUS}=="usb", \
- IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
- GOTO="mouse_end"
-KERNELS=="input*", ENV{ID_BUS}=="bluetooth", \
- IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
- GOTO="mouse_end"
-DRIVERS=="psmouse", SUBSYSTEMS=="serio", \
- IMPORT{builtin}="hwdb 'mouse:ps2::name:$attr{device/name}:'", \
- GOTO="mouse_end"
-
-LABEL="mouse_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="touchpad_end"
-ENV{ID_INPUT}=="", GOTO="touchpad_end"
-ENV{ID_INPUT_TOUCHPAD}=="", GOTO="touchpad_end"
-KERNEL!="event*", GOTO="touchpad_end"
-
-# touchpad:<subsystem>:v<vid>p<pid>:name:<name>:*
-KERNELS=="input*", ENV{ID_BUS}!="", \
- IMPORT{builtin}="hwdb 'touchpad:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
- GOTO="touchpad_end"
-
-LABEL="touchpad_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="net_end"
-SUBSYSTEM!="net", GOTO="net_end"
-
-IMPORT{builtin}="net_id"
-
-SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
-SUBSYSTEMS=="usb", GOTO="net_end"
-
-SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
-SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci"
-
-LABEL="net_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION!="add", GOTO="mtd_probe_end"
-
-KERNEL=="mtd*ro", IMPORT{program}="mtd_probe $devnode"
-
-LABEL="mtd_probe_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-SUBSYSTEM!="sound", GOTO="sound_end"
-
-ACTION=="add|change", KERNEL=="controlC*", ATTR{../uevent}="change"
-ACTION!="change", GOTO="sound_end"
-
-# Ok, we probably need a little explanation here for what the two lines above
-# are good for.
-#
-# The story goes like this: when ALSA registers a new sound card it emits a
-# series of 'add' events to userspace, for the main card device and for all the
-# child device nodes that belong to it. udev relays those to applications,
-# however only maintains the order between father and child, but not between
-# the siblings. The control device node creation can be used as synchronization
-# point. All other devices that belong to a card are created in the kernel
-# before it. However unfortunately due to the fact that siblings are forwarded
-# out of order by udev this fact is lost to applications.
-#
-# OTOH before an application can open a device it needs to make sure that all
-# its device nodes are completely created and set up.
-#
-# As a workaround for this issue we have added the udev rule above which will
-# generate a 'change' event on the main card device from the 'add' event of the
-# card's control device. Due to the ordering semantics of udev this event will
-# only be relayed after all child devices have finished processing properly.
-# When an application needs to listen for appearing devices it can hence look
-# for 'change' events only, and ignore the actual 'add' events.
-#
-# When the application is initialized at the same time as a device is plugged
-# in it may need to figure out if the 'change' event has already been triggered
-# or not for a card. To find that out we store the flag environment variable
-# SOUND_INITIALIZED on the device which simply tells us if the card 'change'
-# event has already been processed.
-
-KERNEL!="card*", GOTO="sound_end"
-
-ENV{SOUND_INITIALIZED}="1"
-
-IMPORT{builtin}="hwdb"
-SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
-SUBSYSTEMS=="usb", GOTO="skip_pci"
-
-SUBSYSTEMS=="firewire", ATTRS{guid}=="?*", \
- ENV{ID_BUS}="firewire", ENV{ID_SERIAL}="$attr{guid}", ENV{ID_SERIAL_SHORT}="$attr{guid}", \
- ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{model}", \
- ENV{ID_VENDOR}="$attr{vendor_name}", ENV{ID_MODEL}="$attr{model_name}"
-SUBSYSTEMS=="firewire", GOTO="skip_pci"
-
-SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
-SUBSYSTEMS=="pci", GOTO="skip_pci"
-
-# If we reach here, the device nor any of its parents are USB/PCI/firewire bus devices.
-# If we now find a parent that is a platform device, assume that we're working with
-# an internal sound card.
-SUBSYSTEMS=="platform", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end"
-
-LABEL="skip_pci"
-
-# Define ID_ID if ID_BUS and ID_SERIAL are set. This will work for both
-# USB and firewire.
-ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}"
-ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}"
-
-IMPORT{builtin}="path_id"
-
-# The values used here for $SOUND_FORM_FACTOR and $SOUND_CLASS should be kept
-# in sync with those defined for PulseAudio's src/pulse/proplist.h
-# PA_PROP_DEVICE_FORM_FACTOR, PA_PROP_DEVICE_CLASS properties.
-
-# If the first PCM device of this card has the pcm class 'modem', then the card is a modem
-ATTR{pcmC%nD0p/pcm_class}=="modem", ENV{SOUND_CLASS}="modem", GOTO="sound_end"
-
-# Identify cards on the internal PCI bus as internal
-SUBSYSTEMS=="pci", DEVPATH=="*/0000:00:??.?/sound/*", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end"
-
-# Devices that also support Image/Video interfaces are most likely webcams
-SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACES}=="*:0e????:*", ENV{SOUND_FORM_FACTOR}="webcam", GOTO="sound_end"
-
-# Matching on the model strings is a bit ugly, I admit
-ENV{ID_MODEL}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
-
-LABEL="sound_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-ACTION!="add", GOTO="drivers_end"
-
-ENV{MODALIAS}=="?*", RUN{builtin}+="kmod load '$env{MODALIAS}'"
-SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN{builtin}+="kmod load tifm_sd"
-SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN{builtin}+="kmod load tifm_ms"
-SUBSYSTEM=="memstick", RUN{builtin}+="kmod load ms_block mspro_block"
-SUBSYSTEM=="i2o", RUN{builtin}+="kmod load i2o_block"
-SUBSYSTEM=="module", KERNEL=="parport_pc", RUN{builtin}+="kmod load ppdev"
-KERNEL=="mtd*ro", ENV{MTD_FTL}=="smartmedia", RUN{builtin}+="kmod load sm_ftl"
-
-LABEL="drivers_end"
+++ /dev/null
-# do not edit this file, it will be overwritten on update
-
-SUBSYSTEM!="net", GOTO="net_setup_link_end"
-
-IMPORT{builtin}="path_id"
-
-ACTION!="add", GOTO="net_setup_link_end"
-
-IMPORT{builtin}="net_setup_link"
-
-NAME=="", ENV{ID_NET_NAME}!="", NAME="$env{ID_NET_NAME}"
-
-LABEL="net_setup_link_end"
+++ /dev/null
-# SPDX-License-Identifier: LGPL-2.1-or-later
-#
-# This file is part of systemd.
-#
-# systemd is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2.1 of the License, or
-# (at your option) any later version.
-
-ACTION=="remove", GOTO="systemd_end"
-
-SUBSYSTEM=="tty", KERNEL=="tty[a-zA-Z]*|hvc*|xvc*|hvsi*|ttysclp*|sclp_line*|3270/tty[0-9]*", TAG+="systemd"
-KERNEL=="vport*", TAG+="systemd"
-
-SUBSYSTEM=="ubi", TAG+="systemd"
-
-SUBSYSTEM=="block", TAG+="systemd"
-
-# We can't make any conclusions about suspended DM devices so let's just import previous SYSTEMD_READY state and skip other rules
-SUBSYSTEM=="block", ENV{DM_SUSPENDED}=="1", IMPORT{db}="SYSTEMD_READY", GOTO="systemd_end"
-SUBSYSTEM=="block", ACTION=="add", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", ENV{SYSTEMD_READY}="0"
-
-# Ignore encrypted devices with no identified superblock on it, since
-# we are probably still calling mke2fs or mkswap on it.
-SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{ID_PART_TABLE_TYPE}=="", ENV{ID_FS_USAGE}=="", ENV{SYSTEMD_READY}="0"
-
-# Explicitly set SYSTEMD_READY=1 for DM devices that don't have it set yet, so that we always have something to import above
-SUBSYSTEM=="block", ENV{DM_UUID}=="?*", ENV{SYSTEMD_READY}=="", ENV{SYSTEMD_READY}="1"
-
-# add symlink to GPT root disk
-SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}!="crypto_LUKS", SYMLINK+="gpt-auto-root"
-SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}=="crypto_LUKS", SYMLINK+="gpt-auto-root-luks"
-SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{DM_NAME}=="root", SYMLINK+="gpt-auto-root"
-
-# Ignore raid devices that are not yet assembled and started
-SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", TEST!="md/array_state", ENV{SYSTEMD_READY}="0"
-SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", ATTR{md/array_state}=="|clear|inactive", ENV{SYSTEMD_READY}="0"
-
-# Ignore loop devices that don't have any file attached
-SUBSYSTEM=="block", KERNEL=="loop[0-9]*", ENV{DEVTYPE}=="disk", TEST!="loop/backing_file", ENV{SYSTEMD_READY}="0"
-
-# Ignore nbd devices until the PID file exists (which signals a connected device)
-SUBSYSTEM=="block", KERNEL=="nbd*", ENV{DEVTYPE}=="disk", TEST!="pid", ENV{SYSTEMD_READY}="0"
-
-# We need a hardware independent way to identify network devices. We
-# use the /sys/subsystem/ path for this. Kernel "bus" and "class" names
-# should be treated as one namespace, like udev handles it. This is mostly
-# just an identification string for systemd, so whether the path actually is
-# accessible or not does not matter as long as it is unique and in the
-# filesystem namespace.
-
-SUBSYSTEM=="net", KERNEL!="lo", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/net/devices/$name"
-SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/bluetooth/devices/%k"
-
-SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_WANTS}+="bluetooth.target"
-ENV{ID_SMARTCARD_READER}=="?*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="smartcard.target"
-SUBSYSTEM=="sound", KERNEL=="card*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sound.target"
-
-SUBSYSTEM=="printer", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
-SUBSYSTEM=="usb", KERNEL=="lp*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
-
-# Apply sysctl variables to network devices (and only to those) as they appear.
-ACTION=="add", SUBSYSTEM=="net", KERNEL!="lo", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/$name --prefix=/net/ipv4/neigh/$name --prefix=/net/ipv6/conf/$name --prefix=/net/ipv6/neigh/$name"
-
-# Pull in backlight save/restore for all backlight devices and
-# keyboard backlights
-SUBSYSTEM=="backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@backlight:$name.service"
-SUBSYSTEM=="leds", KERNEL=="*kbd_backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@leds:$name.service"
-
-# Pull in rfkill save/restore for all rfkill devices
-SUBSYSTEM=="rfkill", ENV{SYSTEMD_RFKILL}="1"
-SUBSYSTEM=="rfkill", IMPORT{builtin}="path_id"
-SUBSYSTEM=="misc", KERNEL=="rfkill", TAG+="systemd", ENV{SYSTEMD_WANTS}+="systemd-rfkill.socket"
-
-# Asynchronously mount file systems implemented by these modules as soon as they are loaded.
-SUBSYSTEM=="module", KERNEL=="fuse", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-fs-fuse-connections.mount"
-SUBSYSTEM=="module", KERNEL=="configfs", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-kernel-config.mount"
-
-LABEL="systemd_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+# enable in-kernel media-presence polling
+ACTION=="add", SUBSYSTEM=="module", KERNEL=="block", ATTR{parameters/events_dfl_poll_msecs}=="0", \
+ ATTR{parameters/events_dfl_poll_msecs}="2000"
+
+# forward scsi device event to corresponding block device
+ACTION=="change", SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST=="block", ATTR{block/*/uevent}="change"
+
+# watch metadata changes, caused by tools closing the device node which was opened for writing
+ACTION!="remove", SUBSYSTEM=="block", KERNEL=="loop*|nvme*|sd*|vd*|xvd*|pmem*|mmcblk*", OPTIONS+="watch"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+SUBSYSTEM!="block", GOTO="btrfs_end"
+ACTION=="remove", GOTO="btrfs_end"
+ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end"
+ENV{SYSTEMD_READY}=="0", GOTO="btrfs_end"
+
+# let the kernel know about this btrfs filesystem, and check if it is complete
+IMPORT{builtin}="btrfs ready $devnode"
+
+# mark the device as not ready to be used by the system
+ENV{ID_BTRFS_READY}=="0", ENV{SYSTEMD_READY}="0"
+
+# reconsider pending devices in case when multidevice volume awaits
+ENV{ID_BTRFS_READY}=="1", RUN+="/usr/bin/udevadm trigger -s block -p ID_BTRFS_READY=0"
+
+LABEL="btrfs_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="cdrom_end"
+SUBSYSTEM!="block", GOTO="cdrom_end"
+KERNEL!="sr[0-9]*|vdisk*|xvd*", GOTO="cdrom_end"
+ENV{DEVTYPE}!="disk", GOTO="cdrom_end"
+
+# unconditionally tag device as CDROM
+KERNEL=="sr[0-9]*", ENV{ID_CDROM}="1"
+
+# stop automatically any mount units bound to the device if the media eject
+# button is pressed.
+ENV{ID_CDROM}=="1", ENV{SYSTEMD_MOUNT_DEVICE_BOUND}="1"
+
+# media eject button pressed
+ENV{DISK_EJECT_REQUEST}=="?*", RUN+="cdrom_id --eject-media $devnode", GOTO="cdrom_end"
+
+# import device and media properties and lock tray to
+# enable the receiving of media eject button events
+IMPORT{program}="cdrom_id --lock-media $devnode"
+
+# ejecting a CD does not remove the device node, so mark the systemd device
+# unit as inactive while there is no medium; this automatically cleans up of
+# stale mounts after ejecting
+ENV{DISK_MEDIA_CHANGE}=="?*", ENV{ID_CDROM_MEDIA}!="?*", ENV{SYSTEMD_READY}="0"
+
+KERNEL=="sr0", SYMLINK+="cdrom", OPTIONS+="link_priority=-100"
+
+LABEL="cdrom_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION!="add", GOTO="drivers_end"
+
+ENV{MODALIAS}=="?*", RUN{builtin}+="kmod load '$env{MODALIAS}'"
+SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN{builtin}+="kmod load tifm_sd"
+SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN{builtin}+="kmod load tifm_ms"
+SUBSYSTEM=="memstick", RUN{builtin}+="kmod load ms_block mspro_block"
+SUBSYSTEM=="i2o", RUN{builtin}+="kmod load i2o_block"
+SUBSYSTEM=="module", KERNEL=="parport_pc", RUN{builtin}+="kmod load ppdev"
+KERNEL=="mtd*ro", ENV{MTD_FTL}=="smartmedia", RUN{builtin}+="kmod load sm_ftl"
+
+LABEL="drivers_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION!="remove", SUBSYSTEM=="drm", SUBSYSTEMS=="pci|usb|platform", IMPORT{builtin}="path_id"
+
+# by-path
+ENV{ID_PATH}=="?*", KERNEL=="card*", SYMLINK+="dri/by-path/$env{ID_PATH}-card"
+ENV{ID_PATH}=="?*", KERNEL=="controlD*", SYMLINK+="dri/by-path/$env{ID_PATH}-control"
+ENV{ID_PATH}=="?*", KERNEL=="renderD*", SYMLINK+="dri/by-path/$env{ID_PATH}-render"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="evdev_end"
+KERNEL!="event*", GOTO="evdev_end"
+
+# skip later rules when we find something for this input device
+IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=evdev:", \
+ RUN{builtin}+="keyboard", GOTO="evdev_end"
+
+# AT keyboard matching by the machine's DMI data
+DRIVERS=="atkbd", \
+ IMPORT{builtin}="hwdb 'evdev:atkbd:$attr{[dmi/id]modalias}'", \
+ RUN{builtin}+="keyboard", GOTO="evdev_end"
+
+# device matching the input device name + properties + the machine's DMI data
+KERNELS=="input*", IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:phys:$attr{phys}:ev:$attr{capabilities/ev}:$attr{[dmi/id]modalias}'", \
+ RUN{builtin}+="keyboard", GOTO="evdev_end"
+
+# device matching the input device name and the machine's DMI data
+KERNELS=="input*", IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:$attr{[dmi/id]modalias}'", \
+ RUN{builtin}+="keyboard", GOTO="evdev_end"
+
+LABEL="evdev_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="id_input_end"
+
+SUBSYSTEM=="input", ENV{ID_INPUT}=="", IMPORT{builtin}="input_id"
+SUBSYSTEM=="input", IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=id-input:modalias:"
+
+LABEL="id_input_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="joystick_end"
+ENV{ID_INPUT_JOYSTICK}=="", GOTO="joystick_end"
+KERNEL!="event*", GOTO="joystick_end"
+
+# joystick:<bustype>:v<vid>p<pid>:name:<name>:*
+KERNELS=="input*", ENV{ID_BUS}!="", \
+ IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
+ GOTO="joystick_end"
+
+LABEL="joystick_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="mouse_end"
+KERNEL!="event*", GOTO="mouse_end"
+ENV{ID_INPUT_MOUSE}=="", GOTO="mouse_end"
+
+# mouse:<subsystem>:v<vid>p<pid>:name:<name>:*
+KERNELS=="input*", ENV{ID_BUS}=="usb", \
+ IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
+ GOTO="mouse_end"
+KERNELS=="input*", ENV{ID_BUS}=="bluetooth", \
+ IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
+ GOTO="mouse_end"
+DRIVERS=="psmouse", SUBSYSTEMS=="serio", \
+ IMPORT{builtin}="hwdb 'mouse:ps2::name:$attr{device/name}:'", \
+ GOTO="mouse_end"
+
+LABEL="mouse_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="net_end"
+SUBSYSTEM!="net", GOTO="net_end"
+
+IMPORT{builtin}="net_id"
+
+SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
+SUBSYSTEMS=="usb", GOTO="net_end"
+
+SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
+SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci"
+
+LABEL="net_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+SUBSYSTEM!="net", GOTO="net_setup_link_end"
+
+IMPORT{builtin}="path_id"
+
+ACTION!="add", GOTO="net_setup_link_end"
+
+IMPORT{builtin}="net_setup_link"
+
+NAME=="", ENV{ID_NET_NAME}!="", NAME="$env{ID_NET_NAME}"
+
+LABEL="net_setup_link_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="persistent_alsa_end"
+SUBSYSTEM!="sound", GOTO="persistent_alsa_end"
+KERNEL!="controlC[0-9]*", GOTO="persistent_alsa_end"
+
+SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id"
+ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}"
+ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+
+IMPORT{builtin}="path_id"
+ENV{ID_PATH}=="?*", SYMLINK+="snd/by-path/$env{ID_PATH}"
+
+LABEL="persistent_alsa_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="persistent_input_end"
+SUBSYSTEM!="input", GOTO="persistent_input_end"
+SUBSYSTEMS=="bluetooth", ENV{ID_BUS}="bluetooth", GOTO="persistent_input_end"
+# Bluetooth devices don't always have the bluetooth subsystem
+ATTRS{id/bustype}=="0005", ENV{ID_BUS}="bluetooth", GOTO="persistent_input_end"
+SUBSYSTEMS=="rmi4", ENV{ID_BUS}="rmi"
+SUBSYSTEMS=="serio", ENV{ID_BUS}="i8042"
+
+SUBSYSTEMS=="usb", ENV{ID_BUS}=="", IMPORT{builtin}="usb_id"
+
+# determine class name for persistent symlinks
+ENV{ID_INPUT_KEYBOARD}=="?*", ENV{.INPUT_CLASS}="kbd"
+ENV{ID_INPUT_MOUSE}=="?*", ENV{.INPUT_CLASS}="mouse"
+ENV{ID_INPUT_TOUCHPAD}=="?*", ENV{.INPUT_CLASS}="mouse"
+ENV{ID_INPUT_TABLET}=="?*", ENV{.INPUT_CLASS}="mouse"
+ENV{ID_INPUT_JOYSTICK}=="?*", ENV{.INPUT_CLASS}="joystick"
+DRIVERS=="pcspkr", ENV{.INPUT_CLASS}="spkr"
+ATTRS{name}=="*dvb*|*DVB*|* IR *", ENV{.INPUT_CLASS}="ir"
+
+# fill empty serial number
+ENV{.INPUT_CLASS}=="?*", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial"
+
+# by-id links
+KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{.INPUT_CLASS}"
+KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-$env{.INPUT_CLASS}"
+KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{.INPUT_CLASS}"
+KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-event-$env{.INPUT_CLASS}"
+# allow empty class for USB devices, by appending the interface number
+SUBSYSTEMS=="usb", ENV{ID_BUS}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", ATTRS{bInterfaceNumber}=="?*", \
+ SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-if$attr{bInterfaceNumber}"
+
+# by-path
+SUBSYSTEMS=="pci|usb|platform|acpi", IMPORT{builtin}="path_id"
+ENV{ID_PATH}=="?*", KERNEL=="mouse*|js*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-$env{.INPUT_CLASS}"
+ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{.INPUT_CLASS}"
+# allow empty class for platform and usb devices; platform supports only a single interface that way
+SUBSYSTEMS=="usb|platform", ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", \
+ SYMLINK+="input/by-path/$env{ID_PATH}-event"
+
+LABEL="persistent_input_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+# persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path}
+# scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de>
+
+ACTION=="remove", GOTO="persistent_storage_end"
+ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_end"
+
+SUBSYSTEM!="block", GOTO="persistent_storage_end"
+KERNEL!="loop*|mmcblk*[0-9]|msblk*[0-9]|mspblk*[0-9]|nvme*|sd*|sr*|vd*|xvd*|bcache*|cciss*|dasd*|ubd*|scm*|pmem*|nbd*|zd*", GOTO="persistent_storage_end"
+
+# ignore partitions that span the entire disk
+TEST=="whole_disk", GOTO="persistent_storage_end"
+
+# for partitions import parent information
+ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*"
+
+# NVMe
+KERNEL=="nvme*[0-9]n*[0-9]", ATTR{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}"
+KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}-part%n"
+
+KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}"
+KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{wwid}=="?*", ENV{ID_WWN}="$attr{wwid}"
+KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}"
+KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{firmware_rev}=="?*", ENV{ID_REVISION}="$attr{firmware_rev}"
+KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \
+ ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}"
+
+KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}"
+KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}"
+KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{firmware_rev}=="?*", ENV{ID_REVISION}="$attr{firmware_rev}"
+KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \
+ ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}-part%n"
+
+# virtio-blk
+KERNEL=="vd*[!0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}"
+KERNEL=="vd*[0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}-part%n"
+
+# ATA
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $devnode"
+
+# ATAPI devices (SPC-3 or later)
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $devnode"
+
+# Run ata_id on non-removable USB Mass Storage (SATA/PATA disks in enclosures)
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", ATTR{removable}=="0", SUBSYSTEMS=="usb", IMPORT{program}="ata_id --export $devnode"
+
+# Fall back usb_id for USB devices
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
+
+# SCSI devices
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --allowlisted -d $devnode", ENV{ID_BUS}="scsi"
+KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --allowlisted -d $devnode", ENV{ID_BUS}="cciss"
+KERNEL=="sd*|sr*|cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+KERNEL=="sd*|cciss*", ENV{DEVTYPE}=="partition", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
+
+# PMEM devices
+KERNEL=="pmem*", ENV{DEVTYPE}=="disk", ATTRS{uuid}=="?*", SYMLINK+="disk/by-id/pmem-$attr{uuid}"
+
+# FireWire
+KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}"
+KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n"
+
+# MMC
+KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ATTRS{serial}=="?*", \
+ ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}"
+KERNEL=="mmcblk[0-9]p[0-9]*", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
+
+# Memstick
+KERNEL=="msblk[0-9]|mspblk[0-9]", SUBSYSTEMS=="memstick", ATTRS{name}=="?*", ATTRS{serial}=="?*", \
+ ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}"
+KERNEL=="msblk[0-9]p[0-9]|mspblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
+
+# by-path
+ENV{DEVTYPE}=="disk", DEVPATH!="*/virtual/*", IMPORT{builtin}="path_id"
+KERNEL=="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-boot%n"
+KERNEL!="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
+ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
+
+# legacy virtio-pci by-path links (deprecated)
+KERNEL=="vd*[!0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}"
+KERNEL=="vd*[0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}-part%n"
+
+# probe filesystem metadata of optical drives which have a media inserted
+KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?*", \
+ IMPORT{builtin}="blkid --hint=session_offset=$env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}"
+# single-session CDs do not have ID_CDROM_MEDIA_SESSION_LAST_OFFSET
+KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", \
+ IMPORT{builtin}="blkid --noraid"
+
+# probe filesystem metadata of disks
+KERNEL!="sr*", IMPORT{builtin}="blkid"
+
+# by-label/by-uuid links (filesystem metadata)
+ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
+ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
+
+# by-id (World Wide Name)
+ENV{DEVTYPE}=="disk", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}"
+ENV{DEVTYPE}=="partition", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}-part%n"
+
+# by-partlabel/by-partuuid links (partition metadata)
+ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}"
+ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}"
+
+LABEL="persistent_storage_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="persistent_v4l_end"
+SUBSYSTEM!="video4linux", GOTO="persistent_v4l_end"
+ENV{MAJOR}=="", GOTO="persistent_v4l_end"
+
+IMPORT{program}="v4l_id $devnode"
+
+SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
+KERNEL=="video*", ENV{ID_SERIAL}=="?*", SYMLINK+="v4l/by-id/$env{ID_BUS}-$env{ID_SERIAL}-video-index$attr{index}"
+
+# check for valid "index" number
+TEST!="index", GOTO="persistent_v4l_end"
+ATTR{index}!="?*", GOTO="persistent_v4l_end"
+
+IMPORT{builtin}="path_id"
+ENV{ID_PATH}=="?*", KERNEL=="video*|vbi*", SYMLINK+="v4l/by-path/$env{ID_PATH}-video-index$attr{index}"
+ENV{ID_PATH}=="?*", KERNEL=="audio*", SYMLINK+="v4l/by-path/$env{ID_PATH}-audio-index$attr{index}"
+
+LABEL="persistent_v4l_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION!="add", GOTO="mtd_probe_end"
+
+KERNEL=="mtd*ro", IMPORT{program}="mtd_probe $devnode"
+
+LABEL="mtd_probe_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="sensor_end"
+
+# device matching the sensor's name and the machine's DMI data for IIO devices
+SUBSYSTEM=="iio", KERNEL=="iio*", SUBSYSTEMS=="usb|i2c", \
+ IMPORT{builtin}="hwdb 'sensor:modalias:$attr{modalias}:$attr{[dmi/id]modalias}'", \
+ GOTO="sensor_end"
+
+SUBSYSTEM=="input", ENV{ID_INPUT_ACCELEROMETER}=="1", SUBSYSTEMS=="acpi", \
+ IMPORT{builtin}="hwdb 'sensor:modalias:acpi:$attr{hid}:$attr{[dmi/id]modalias}'", \
+ GOTO="sensor_end"
+
+SUBSYSTEM=="input", ENV{ID_INPUT_ACCELEROMETER}=="1", SUBSYSTEMS=="platform", \
+ IMPORT{builtin}="hwdb 'sensor:modalias:platform:$id:$attr{[dmi/id]modalias}'", \
+ GOTO="sensor_end"
+
+LABEL="sensor_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="serial_end"
+SUBSYSTEM!="tty", GOTO="serial_end"
+
+SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
+SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci"
+SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
+
+# /dev/serial/by-path/, /dev/serial/by-id/ for USB devices
+KERNEL!="ttyUSB[0-9]*|ttyACM[0-9]*", GOTO="serial_end"
+
+SUBSYSTEMS=="usb-serial", ENV{.ID_PORT}="$attr{port_number}"
+
+IMPORT{builtin}="path_id"
+ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="", SYMLINK+="serial/by-path/$env{ID_PATH}"
+ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-path/$env{ID_PATH}-port$env{.ID_PORT}"
+
+IMPORT{builtin}="usb_id"
+ENV{ID_SERIAL}=="", GOTO="serial_end"
+SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACE_NUM}="$attr{bInterfaceNumber}"
+ENV{ID_USB_INTERFACE_NUM}=="", GOTO="serial_end"
+ENV{.ID_PORT}=="", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}"
+ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}-port$env{.ID_PORT}"
+
+LABEL="serial_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+SUBSYSTEM!="sound", GOTO="sound_end"
+
+ACTION=="add|change", KERNEL=="controlC*", ATTR{../uevent}="change"
+ACTION!="change", GOTO="sound_end"
+
+# Ok, we probably need a little explanation here for what the two lines above
+# are good for.
+#
+# The story goes like this: when ALSA registers a new sound card it emits a
+# series of 'add' events to userspace, for the main card device and for all the
+# child device nodes that belong to it. udev relays those to applications,
+# however only maintains the order between father and child, but not between
+# the siblings. The control device node creation can be used as synchronization
+# point. All other devices that belong to a card are created in the kernel
+# before it. However unfortunately due to the fact that siblings are forwarded
+# out of order by udev this fact is lost to applications.
+#
+# OTOH before an application can open a device it needs to make sure that all
+# its device nodes are completely created and set up.
+#
+# As a workaround for this issue we have added the udev rule above which will
+# generate a 'change' event on the main card device from the 'add' event of the
+# card's control device. Due to the ordering semantics of udev this event will
+# only be relayed after all child devices have finished processing properly.
+# When an application needs to listen for appearing devices it can hence look
+# for 'change' events only, and ignore the actual 'add' events.
+#
+# When the application is initialized at the same time as a device is plugged
+# in it may need to figure out if the 'change' event has already been triggered
+# or not for a card. To find that out we store the flag environment variable
+# SOUND_INITIALIZED on the device which simply tells us if the card 'change'
+# event has already been processed.
+
+KERNEL!="card*", GOTO="sound_end"
+
+ENV{SOUND_INITIALIZED}="1"
+
+IMPORT{builtin}="hwdb"
+SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
+SUBSYSTEMS=="usb", GOTO="skip_pci"
+
+SUBSYSTEMS=="firewire", ATTRS{guid}=="?*", \
+ ENV{ID_BUS}="firewire", ENV{ID_SERIAL}="$attr{guid}", ENV{ID_SERIAL_SHORT}="$attr{guid}", \
+ ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{model}", \
+ ENV{ID_VENDOR}="$attr{vendor_name}", ENV{ID_MODEL}="$attr{model_name}"
+SUBSYSTEMS=="firewire", GOTO="skip_pci"
+
+SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
+SUBSYSTEMS=="pci", GOTO="skip_pci"
+
+# If we reach here, the device nor any of its parents are USB/PCI/firewire bus devices.
+# If we now find a parent that is a platform device, assume that we're working with
+# an internal sound card.
+SUBSYSTEMS=="platform", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end"
+
+LABEL="skip_pci"
+
+# Define ID_ID if ID_BUS and ID_SERIAL are set. This will work for both
+# USB and firewire.
+ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}"
+ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}"
+
+IMPORT{builtin}="path_id"
+
+# The values used here for $SOUND_FORM_FACTOR and $SOUND_CLASS should be kept
+# in sync with those defined for PulseAudio's src/pulse/proplist.h
+# PA_PROP_DEVICE_FORM_FACTOR, PA_PROP_DEVICE_CLASS properties.
+
+# If the first PCM device of this card has the pcm class 'modem', then the card is a modem
+ATTR{pcmC%nD0p/pcm_class}=="modem", ENV{SOUND_CLASS}="modem", GOTO="sound_end"
+
+# Identify cards on the internal PCI bus as internal
+SUBSYSTEMS=="pci", DEVPATH=="*/0000:00:??.?/sound/*", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end"
+
+# Devices that also support Image/Video interfaces are most likely webcams
+SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACES}=="*:0e????:*", ENV{SOUND_FORM_FACTOR}="webcam", GOTO="sound_end"
+
+# Matching on the model strings is a bit ugly, I admit
+ENV{ID_MODEL}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
+ENV{ID_MODEL_FROM_DATABASE}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
+
+ENV{ID_MODEL}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
+ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
+
+ENV{ID_MODEL}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
+ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
+
+ENV{ID_MODEL}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
+ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
+
+ENV{ID_MODEL}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
+ENV{ID_MODEL_FROM_DATABASE}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
+
+LABEL="sound_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+# persistent storage links: /dev/tape/{by-id,by-path}
+
+ACTION=="remove", GOTO="persistent_storage_tape_end"
+ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_tape_end"
+
+# type 8 devices are "Medium Changers"
+SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="scsi_id --sg-version=3 --export --allowlisted -d $devnode", \
+ SYMLINK+="tape/by-id/scsi-$env{ID_SERIAL}"
+
+# iSCSI devices from the same host have all the same ID_SERIAL,
+# but additionally a property named ID_SCSI_SERIAL.
+SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", ENV{ID_SCSI_SERIAL}=="?*", \
+ SYMLINK+="tape/by-id/scsi-$env{ID_SCSI_SERIAL}"
+
+SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{builtin}="path_id", \
+ SYMLINK+="tape/by-path/$env{ID_PATH}-changer"
+
+SUBSYSTEM!="scsi_tape", GOTO="persistent_storage_tape_end"
+
+KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394"
+KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
+KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", KERNELS=="[0-9]*:*[0-9]", ENV{.BSG_DEV}="$root/bsg/$id"
+KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --allowlisted --export --device=$env{.BSG_DEV}", ENV{ID_BUS}="scsi"
+KERNEL=="st*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+KERNEL=="st*[0-9]", ENV{ID_SCSI_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SCSI_SERIAL}"
+KERNEL=="nst*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst"
+KERNEL=="nst*[0-9]", ENV{ID_SCSI_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SCSI_SERIAL}-nst"
+
+# by-path (parent device path)
+KERNEL=="st*[0-9]|nst*[0-9]", IMPORT{builtin}="path_id"
+KERNEL=="st*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}"
+KERNEL=="nst*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}-nst"
+
+LABEL="persistent_storage_tape_end"
--- /dev/null
+# SPDX-License-Identifier: LGPL-2.1-or-later
+#
+# This file is part of systemd.
+#
+# systemd is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or
+# (at your option) any later version.
+
+ACTION=="remove", GOTO="systemd_end"
+
+SUBSYSTEM=="tty", KERNEL=="tty[a-zA-Z]*|hvc*|xvc*|hvsi*|ttysclp*|sclp_line*|3270/tty[0-9]*", TAG+="systemd"
+KERNEL=="vport*", TAG+="systemd"
+
+SUBSYSTEM=="ubi", TAG+="systemd"
+
+SUBSYSTEM=="block", TAG+="systemd"
+
+# We can't make any conclusions about suspended DM devices so let's just import previous SYSTEMD_READY state and skip other rules
+SUBSYSTEM=="block", ENV{DM_SUSPENDED}=="1", IMPORT{db}="SYSTEMD_READY", GOTO="systemd_end"
+SUBSYSTEM=="block", ACTION=="add", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", ENV{SYSTEMD_READY}="0"
+
+# Ignore encrypted devices with no identified superblock on it, since
+# we are probably still calling mke2fs or mkswap on it.
+SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{ID_PART_TABLE_TYPE}=="", ENV{ID_FS_USAGE}=="", ENV{SYSTEMD_READY}="0"
+
+# Explicitly set SYSTEMD_READY=1 for DM devices that don't have it set yet, so that we always have something to import above
+SUBSYSTEM=="block", ENV{DM_UUID}=="?*", ENV{SYSTEMD_READY}=="", ENV{SYSTEMD_READY}="1"
+
+# add symlink to GPT root disk
+SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}!="crypto_LUKS", SYMLINK+="gpt-auto-root"
+SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}=="crypto_LUKS", SYMLINK+="gpt-auto-root-luks"
+SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{DM_NAME}=="root", SYMLINK+="gpt-auto-root"
+
+# Ignore raid devices that are not yet assembled and started
+SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", TEST!="md/array_state", ENV{SYSTEMD_READY}="0"
+SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", ATTR{md/array_state}=="|clear|inactive", ENV{SYSTEMD_READY}="0"
+
+# Ignore loop devices that don't have any file attached
+SUBSYSTEM=="block", KERNEL=="loop[0-9]*", ENV{DEVTYPE}=="disk", TEST!="loop/backing_file", ENV{SYSTEMD_READY}="0"
+
+# Ignore nbd devices until the PID file exists (which signals a connected device)
+SUBSYSTEM=="block", KERNEL=="nbd*", ENV{DEVTYPE}=="disk", TEST!="pid", ENV{SYSTEMD_READY}="0"
+
+# We need a hardware independent way to identify network devices. We
+# use the /sys/subsystem/ path for this. Kernel "bus" and "class" names
+# should be treated as one namespace, like udev handles it. This is mostly
+# just an identification string for systemd, so whether the path actually is
+# accessible or not does not matter as long as it is unique and in the
+# filesystem namespace.
+
+SUBSYSTEM=="net", KERNEL!="lo", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/net/devices/$name"
+SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/bluetooth/devices/%k"
+
+SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_WANTS}+="bluetooth.target"
+ENV{ID_SMARTCARD_READER}=="?*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="smartcard.target"
+SUBSYSTEM=="sound", KERNEL=="card*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sound.target"
+
+SUBSYSTEM=="printer", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
+SUBSYSTEM=="usb", KERNEL=="lp*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
+SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
+
+# Apply sysctl variables to network devices (and only to those) as they appear.
+ACTION=="add", SUBSYSTEM=="net", KERNEL!="lo", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/$name --prefix=/net/ipv4/neigh/$name --prefix=/net/ipv6/conf/$name --prefix=/net/ipv6/neigh/$name"
+
+# Pull in backlight save/restore for all backlight devices and
+# keyboard backlights
+SUBSYSTEM=="backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@backlight:$name.service"
+SUBSYSTEM=="leds", KERNEL=="*kbd_backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@leds:$name.service"
+
+# Pull in rfkill save/restore for all rfkill devices
+SUBSYSTEM=="rfkill", ENV{SYSTEMD_RFKILL}="1"
+SUBSYSTEM=="rfkill", IMPORT{builtin}="path_id"
+SUBSYSTEM=="misc", KERNEL=="rfkill", TAG+="systemd", ENV{SYSTEMD_WANTS}+="systemd-rfkill.socket"
+
+# Asynchronously mount file systems implemented by these modules as soon as they are loaded.
+SUBSYSTEM=="module", KERNEL=="fuse", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-fs-fuse-connections.mount"
+SUBSYSTEM=="module", KERNEL=="configfs", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-kernel-config.mount"
+
+LABEL="systemd_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="touchpad_end"
+ENV{ID_INPUT}=="", GOTO="touchpad_end"
+ENV{ID_INPUT_TOUCHPAD}=="", GOTO="touchpad_end"
+KERNEL!="event*", GOTO="touchpad_end"
+
+# touchpad:<subsystem>:v<vid>p<pid>:name:<name>:*
+KERNELS=="input*", ENV{ID_BUS}!="", \
+ IMPORT{builtin}="hwdb 'touchpad:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
+ GOTO="touchpad_end"
+
+LABEL="touchpad_end"
--- /dev/null
+# do not edit this file, it will be overwritten on update
+
+# run a command on remove events
+ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
+ACTION=="remove", GOTO="default_end"
+
+SUBSYSTEM=="virtio-ports", KERNEL=="vport*", ATTR{name}=="?*", SYMLINK+="virtio-ports/$attr{name}"
+
+# select "system RTC" or just use the first one
+SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc"
+SUBSYSTEM=="rtc", KERNEL=="rtc0", SYMLINK+="rtc", OPTIONS+="link_priority=-100"
+
+SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
+ENV{MODALIAS}!="", IMPORT{builtin}="hwdb --subsystem=$env{SUBSYSTEM}"
+
+ACTION!="add", GOTO="default_end"
+
+SUBSYSTEM=="tty", KERNEL=="ptmx", GROUP="tty", MODE="0666"
+SUBSYSTEM=="tty", KERNEL=="tty", GROUP="tty", MODE="0666"
+SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620"
+SUBSYSTEM=="tty", KERNEL=="sclp_line[0-9]*", GROUP="tty", MODE="0620"
+SUBSYSTEM=="tty", KERNEL=="ttysclp[0-9]*", GROUP="tty", MODE="0620"
+SUBSYSTEM=="tty", KERNEL=="3270/tty[0-9]*", GROUP="tty", MODE="0620"
+SUBSYSTEM=="vc", KERNEL=="vcs*|vcsa*", GROUP="tty"
+KERNEL=="tty[A-Z]*[0-9]|ttymxc[0-9]*|pppox[0-9]*|ircomm[0-9]*|noz[0-9]*|rfcomm[0-9]*", GROUP="dialout"
+
+SUBSYSTEM=="mem", KERNEL=="mem|kmem|port", GROUP="kmem", MODE="0640"
+
+SUBSYSTEM=="input", GROUP="input"
+SUBSYSTEM=="input", KERNEL=="js[0-9]*", MODE="0664"
+
+SUBSYSTEM=="video4linux", GROUP="video"
+SUBSYSTEM=="graphics", GROUP="video"
+SUBSYSTEM=="drm", KERNEL!="renderD*", GROUP="video"
+SUBSYSTEM=="dvb", GROUP="video"
+SUBSYSTEM=="media", GROUP="video"
+SUBSYSTEM=="cec", GROUP="video"
+
+SUBSYSTEM=="drm", KERNEL=="renderD*", GROUP="render", MODE="0666"
+SUBSYSTEM=="kfd", GROUP="render", MODE="0666"
+
+SUBSYSTEM=="sound", GROUP="audio", \
+ OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer"
+
+SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
+
+SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", GROUP="video"
+SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", GROUP="video"
+SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video"
+SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", GROUP="video"
+
+KERNEL=="parport[0-9]*", GROUP="lp"
+SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp"
+SUBSYSTEM=="ppdev", GROUP="lp"
+KERNEL=="lp[0-9]*", GROUP="lp"
+KERNEL=="irlpt[0-9]*", GROUP="lp"
+SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
+
+SUBSYSTEM=="block", GROUP="disk"
+SUBSYSTEM=="block", KERNEL=="sr[0-9]*", GROUP="cdrom"
+SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom"
+KERNEL=="sch[0-9]*", GROUP="cdrom"
+KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
+KERNEL=="pktcdvd", GROUP="cdrom"
+
+SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape"
+SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk"
+KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk"
+KERNEL=="loop-control", GROUP="disk", OPTIONS+="static_node=loop-control"
+KERNEL=="btrfs-control", GROUP="disk"
+KERNEL=="rawctl", GROUP="disk"
+SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", GROUP="disk"
+SUBSYSTEM=="aoe", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"
+
+KERNEL=="rfkill", MODE="0664"
+KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun"
+
+KERNEL=="fuse", MODE="0666", OPTIONS+="static_node=fuse"
+
+# The static_node is required on s390x and ppc (they are using MODULE_ALIAS)
+KERNEL=="kvm", GROUP="kvm", MODE="0666", OPTIONS+="static_node=kvm"
+
+SUBSYSTEM=="ptp", ATTR{clock_name}=="KVM virtual PTP", SYMLINK += "ptp_kvm"
+
+LABEL="default_end"
--- /dev/null
+path
+# SPDX-License-Identifier: LGPL-2.1-or-later
+#
+# This file is part of systemd.
+#
+# systemd is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or
+# (at your option) any later version.
+
+[Unit]
+Description=Dispatch Password Requests to Console Directory Watch
+Documentation=man:systemd-ask-password-console.service(8)
+DefaultDependencies=no
+Conflicts=shutdown.target
+After=plymouth-start.service
+Before=paths.target shutdown.target cryptsetup.target
+ConditionPathExists=!/run/plymouth/pid
+
+[Path]
+DirectoryNotEmpty=/run/systemd/ask-password
+MakeDirectory=yes
--- /dev/null
+automount
+# SPDX-License-Identifier: LGPL-2.1-or-later
+#
+# This file is part of systemd.
+#
+# systemd is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or
+# (at your option) any later version.
+
+[Unit]
+Description=Arbitrary Executable File Formats File System Automount Point
+Documentation=https://docs.kernel.org/admin-guide/binfmt-misc.html
+Documentation=https://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
+DefaultDependencies=no
+Before=sysinit.target
+ConditionPathExists=/proc/sys/fs/binfmt_misc/
+ConditionPathIsReadWrite=/proc/sys/
+
+[Automount]
+Where=/proc/sys/fs/binfmt_misc
+++ /dev/null
-automount
-# SPDX-License-Identifier: LGPL-2.1-or-later
-#
-# This file is part of systemd.
-#
-# systemd is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2.1 of the License, or
-# (at your option) any later version.
-
-[Unit]
-Description=Arbitrary Executable File Formats File System Automount Point
-Documentation=https://docs.kernel.org/admin-guide/binfmt-misc.html
-Documentation=https://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
-DefaultDependencies=no
-Before=sysinit.target
-ConditionPathExists=/proc/sys/fs/binfmt_misc/
-ConditionPathIsReadWrite=/proc/sys/
-
-[Automount]
-Where=/proc/sys/fs/binfmt_misc
+++ /dev/null
-path
-# SPDX-License-Identifier: LGPL-2.1-or-later
-#
-# This file is part of systemd.
-#
-# systemd is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2.1 of the License, or
-# (at your option) any later version.
-
-[Unit]
-Description=Dispatch Password Requests to Console Directory Watch
-Documentation=man:systemd-ask-password-console.service(8)
-DefaultDependencies=no
-Conflicts=shutdown.target
-After=plymouth-start.service
-Before=paths.target shutdown.target cryptsetup.target
-ConditionPathExists=!/run/plymouth/pid
-
-[Path]
-DirectoryNotEmpty=/run/systemd/ask-password
-MakeDirectory=yes
+++ /dev/null
-timer
-# SPDX-License-Identifier: LGPL-2.1-or-later
-[Unit]
-Description=Daily Cleanup of Temporary Directories
-Documentation=man:tmpfiles.d(5) man:systemd-tmpfiles(8)
-
-[Timer]
-OnBootSec=15min
-OnUnitActiveSec=1d
-OnBootSec=1s
-OnStartupSec=234
-OnUnitActiveSec=2y
-OnUnitInactiveSec=23434
-OnCalendar=minutely
-OnCalendar=*-*-* *:*:00
-OnCalendar=hourly
-OnCalendar=*-*-* *:00:00
-OnCalendar=daily
-OnCalendar=*-*-* 00:00:00
-OnCalendar=monthly
-OnCalendar=*-*-01 00:00:00
-OnCalendar=weekly
-OnCalendar=Mon *-*-* 00:00:00
-OnCalendar=yearly
-OnCalendar=*-01-01 00:00:00
-OnCalendar=quarterly
-OnCalendar=*-01,04,07,10-01 00:00:00
-OnCalendar=semiannually
-OnCalendar=*-01,07-01 00:00:00
-OnCalendar=Fri 2012-11-23 11:12:13
-
-Persistent=true
-AccuracySec=24h
-RandomizedDelaySec=234234234
-FixedRandomDelay=true
-
-Persistent=no
-Unit=foo.service
-
-WakeSystem=false
-RemainAfterElapse=true
--- /dev/null
+timer
+# SPDX-License-Identifier: LGPL-2.1-or-later
+[Unit]
+Description=Daily Cleanup of Temporary Directories
+Documentation=man:tmpfiles.d(5) man:systemd-tmpfiles(8)
+
+[Timer]
+OnBootSec=15min
+OnUnitActiveSec=1d
+OnBootSec=1s
+OnStartupSec=234
+OnUnitActiveSec=2y
+OnUnitInactiveSec=23434
+OnCalendar=minutely
+OnCalendar=*-*-* *:*:00
+OnCalendar=hourly
+OnCalendar=*-*-* *:00:00
+OnCalendar=daily
+OnCalendar=*-*-* 00:00:00
+OnCalendar=monthly
+OnCalendar=*-*-01 00:00:00
+OnCalendar=weekly
+OnCalendar=Mon *-*-* 00:00:00
+OnCalendar=yearly
+OnCalendar=*-01-01 00:00:00
+OnCalendar=quarterly
+OnCalendar=*-01,04,07,10-01 00:00:00
+OnCalendar=semiannually
+OnCalendar=*-01,07-01 00:00:00
+OnCalendar=Fri 2012-11-23 11:12:13
+
+Persistent=true
+AccuracySec=24h
+RandomizedDelaySec=234234234
+FixedRandomDelay=true
+
+Persistent=no
+Unit=foo.service
+
+WakeSystem=false
+RemainAfterElapse=true
projects / systemd / .git / commitdiff