arm64: dts: qcom: clean up 'regulator-allowed-modes' indentation

When recently adding the missing 'regulator-allowed-modes' properties it
appears that the binding example with its four-spaces indentation
(corresponding to a single tab, which is still to little) was copied
verbatim.

Drop the unnecessary first line break after 'regulator-allowed-modes'
properties and indent the single remaining continuation line properly.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116102054.4673-3-johan+linaro@kernel.org

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 01ac460d910ecaabe15d062ec06f0c012c559585..952acfc04adcf510c5e0eee4356903486c2ff29f 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -136,9 +136,8 @@ vreg_l5a_0p88: ldo5 {
                        regulator-max-microvolt = <880000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7a_1p8: ldo7 {
@@ -154,9 +153,8 @@ vreg_l10a_2p96: ldo10 {
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l11a_0p8: ldo11 {
@@ -263,9 +261,8 @@ vreg_l5c_1p2: ldo5 {
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7c_1p8: ldo7 {
@@ -281,9 +278,8 @@ vreg_l8c_1p2: ldo8 {
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l10c_3p3: ldo10 {

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index e9830e72dc6c51a18698e597b2eee2392e85136e..84cb6f3eeb564c28f25baafd1125f12c9a0fe48a 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -90,9 +90,8 @@ vreg_l3c: ldo3 {
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l4c: ldo4 {
@@ -108,9 +107,8 @@ vreg_l6c: ldo6 {
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7c: ldo7 {
@@ -126,9 +124,8 @@ vreg_l10c: ldo10 {
                        regulator-max-microvolt = <2504000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l17c: ldo17 {
@@ -137,9 +134,8 @@ vreg_l17c: ldo17 {
                        regulator-max-microvolt = <2504000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
        };
 

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index f09810e3d9563e7540db0ec48b1a4ef2af72ff76..551768f9772973c878c9b49deb3a23050497bfe7 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -170,9 +170,8 @@ vreg_l7c: ldo7 {
                        regulator-max-microvolt = <2504000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l13c: ldo13 {
@@ -195,9 +194,8 @@ vreg_l3d: ldo3 {
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l4d: ldo4 {

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 20f35623d1ef5166a28c88014804263d42bda6a7..94f77d376662e9d2249cbad954b836caf455ce22 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -231,9 +231,8 @@ pm6150l_l6: ldo6 {
                        regulator-max-microvolt = <2950000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
 
                };
 
@@ -254,9 +253,8 @@ pm6150l_l9: ldo9 {
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
 
                };
 

diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 1cb14051ab1b2bbb68c466f988c55418023c07ee..c456e9594ea5b1a2f5bab4bccc75a3c6f5c29559 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -282,9 +282,8 @@ vreg_l6e: ldo6 {
                        regulator-max-microvolt = <2950000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                               <RPMH_REGULATOR_MODE_LPM
-                                RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7e: ldo7 {
@@ -304,9 +303,8 @@ vreg_l9e: ldo9 {
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                               <RPMH_REGULATOR_MODE_LPM
-                                RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l10e: ldo10 {

diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index fb6e5a140c9f6b2f0b5ec273973424f31e5799ee..c958a8b16730306be57eac19a9ce2a097b934382 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -348,9 +348,8 @@ vreg_l6c_2p9: ldo6 {
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7c_3p0: ldo7 {
@@ -370,9 +369,8 @@ vreg_l9c_2p9: ldo9 {
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l10c_3p3: ldo10 {

diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 2a223ed50102b6ba068b1165bdcd17bbcb4337f1..38746f2489699cb5ff91d040bd7ca5b427ae3ad9 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -317,9 +317,8 @@ vreg_l6c_2p9: ldo6 {
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7c_2p85: ldo7 {
@@ -342,9 +341,8 @@ vreg_l9c_2p9: ldo9 {
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l10c_3p3: ldo10 {

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 69ae6503c2f66f36efe9a9cb773f079294803048..26a6081448868b233bd7e4a0b5f1082f43f9d887 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -107,9 +107,8 @@ vreg_l5b_0p88: ldo5 {
                        regulator-max-microvolt = <888000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l6b_1p2: ldo6 {
@@ -118,9 +117,8 @@ vreg_l6b_1p2: ldo6 {
                        regulator-max-microvolt = <1208000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7b_2p96: ldo7 {
@@ -129,9 +127,8 @@ vreg_l7b_2p96: ldo7 {
                        regulator-max-microvolt = <2504000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l9b_1p2: ldo9 {
@@ -140,9 +137,8 @@ vreg_l9b_1p2: ldo9 {
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
        };